Edge IoT Gateway M User Guide

• 1. Quick Start
  • 1.1. Connect over serial console
  • 1.2. Connect using a monitor/keyboard
  • 1.3. Connect over SSH
  • 1.4. Connector Overview
• 2. Hardware Features
  • 2.1. Specifications
    • 2.1.1. Compute
    • 2.1.2. Networking
    • 2.1.3. Interfaces
    • 2.1.4. Electrical
    • 2.1.5. Mechanical & Environmental
  • 2.2. Interfaces
    • 2.2.1. External Interfaces
  • 2.3. Antenna Configuration
    • 2.3.1. Cellular + GNSS variant
    • 2.3.2. Cellular + GNSS + Wirepas (2.4 GHz) variant
    • 2.3.3. Cellular + Wi-Fi/BT + Wirepas (2.4 GHz) variant
    • 2.3.4. Wi-Fi/BT variant
    • 2.3.5. Wi-Fi/BT + Wirepas (2.4 GHz) variant
  • 2.4. Industrial I/O (Example of a subsection within Industrial I/O)
    • 2.4.1. CAN Bus
    • 2.4.2. RS-232
    • 2.4.3. RS-485
    • 2.4.4. Digital inputs and outputs
    • 2.4.5. Industrial I/O terminal block
  • 2.5. Cellular Frequencies
• 3. Flashing Debian
  • 3.1. Goals
  • 3.2. Prerequisites
  • 3.3. Steps
    • 3.3.1. Installing NXP UUU
    • 3.3.2. Preparing the image files
    • 3.3.3. Accessing the UUU port
    • 3.3.4. Flashing the full eMMC image
    • 3.3.5. First boot
  • 3.4. Hardware configuration